RS series resistance level switch uses the synchronous motor to drive the shaft and the blade to rotate through the reduction gear. When the solid material to be tested touches or covers the blade, the rotation of the blade is blocked, and the resistance is transmitted to the detection device inside the instrument through the rotation shaft. A switch signal is output to the outside, and the motor power is cut off to stop the blade from rotating.

The main parameters

Output SPDT SPDT relay output

Power consumption 4W

Working voltage 24VDC (output ripple is less than 100mVp-p) 220VAC 50/60Hz

Features

Bearing support, reliable operation The original sealing design can prevent dust from infiltrating along the shaft. The torque is stable and reliable, and the torque can be adjusted. The blade can withstand heavy loads, and the clutch automatically slips to protect the motor from damage. Inspection and maintenance of internal components IP65 design, good sealing, reliable outdoor installation and use